VW T6 - APP-control for water-heater
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 6224-156
Control the parking heater with your mobile phone simply by APP, SMS or Call.
Suitable for the following vehicles with factory installed parking heater (Webasto Thermotop VEVO).
- VW T6 with waterheater and remote control
- VW T6 with waterheatervwithout remote control
Installation
The installation of the APP-control depends on the installed operating device for the parking heater.
With remote control
The APP-control is connected "plug & play" to the original receiver of the radio remote control using the included Y-cable.
Without remote control
(The heater can be controled via the control panel at the roof only.)
The APP-control is connected "plug&play" to the connector of the heater beneath the drivers seat using the included y-cable.
Features
- Switching by APP, SMS or Call
- 5 authorized numbers
- 24h timerfunction
- Input for external switch
- Alarmfunction
- Input for external temp. sensor
- GPS-positioning (optional)
- external temperature sensor (optional)
Network coverage
Future-proof due to 4G (LTE) technology.
Our new APP-control v11x supports not only the 4G (LTE) standard but still 3G (UMTS) and 2G (GSM) mobile networks.
This way we can achieve the best possible reachability and functionality in all current european mobile phone networks.
Switzerland is about the shutdown the 2G (GSM) mobile network until the end of 2020. Devices which support the 2G standard only are not functional anymore.
The date for shutting down the 2G network in germany is not yet known.
GPS-Positioning
The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.
Alarminput
You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.
The alarmsystem must output a +12v signal when triggered. For further information please have a look at our "installation guide" on this webpage.
Safety
The parking heater can only controlled via "authorized numbers". You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.
APP, SMS, Call
You can control the parking heater by APP, SMS, or Call. Switching the heater by call is free of charge as there is no connection established. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.
The APP-control requires a SIM-card wich is not included into delivery. You can use every SIM-card which supports sms and call e.g. prepaid card.
Technical data
- voltage supply: 10 - 15VDC
- current consumption: standby <10mA, login: briefly 2A
- antenna connection: internal antenna
- SIM-card: nano-SIM
- temperature range: -30°C bis 80°C
- GSM-module: 4G (LTE), 3G (UMTS), 2G (GSM)
- dimensions: 63x60x22mm (LxWxH)
Scope of delivery
- danhag APP-control
- vehicle specific connection cord
- users manual
- GPS-receiver *
* if you select "with GPS" the GPS-receiver will be included into delivery .
Vehicle manufacturers are constantly developing their vehicles and making changes as part of the model update.
Many vehicles are also available in countless equipment variants.
We do not have the opportunity to test our devices in all vehicles or equipment variants.
It is therefore possible that the devices we offer may not function as intended in some vehicle models or versions and/or may function as intended and / or cause error entries.
In this case, we will of course take the device back.
We will not reimburse any costs incurred for troubleshooting, installation, etc.
Installation
The installation of the APP-control depends on the installed operating device for the parking heater.
With remote control for parking heater
The APP-control is connected "plug&play" directly to the receiver of the original remote control.
The receiver is located behind the cover below the steering wheel.
Step 1, dismount the light switch
- move the switch to the vertical position (position "0")
- push the switch and turn it clockwise until it stops (keep the switch pushed)
- pull the switch out
Step 2, remove the cover
Remove the screw behind the light switch.
Remove both cover, on the left and at the bottom.
Step 3, Connect the APP-control
- unplug the blue, 6-pole connector at the receiver
- plug in the Y-cable
- connect the original connector to the Y-cable
Step 4, configure the APP-control
Configure the APP-control as described in the users manual.
Outputsignal
- E-BUS 3
Without remote control
The APP-control is connected to the connector of the airheater directly, using the included, universal connection cable.
The connector is located below the drivers seat (red connector, 14-pin, pin1 green/white).
Connection of the APP-control
- yellow (control line) -> connector under the drivers seat, PIN1 (green/white)
- red -> +12V
- brown -> ground
Optionally, you can use a y-cable to connect the app-control easily plug&play.
Art. No. : 6003-013
Outputsignal
- W-BUS 6
