Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 6224-196-FB
Installation - straightforward
Control the parking heater with your mobile phone simply by APP, SMS or Call.
Suitable for the following vehicles with factory installed parking heater (Webasto Airtop).
- VW T6.1 with Airheater and remote control
- VW T6.1 with Airheater without remote control (Camperunit only)
The installation of the APP-control depends on the installed operating device and parking heater.
With remote control
Your car has an airheater (Air Top) installed.
The heater can be controlled via a radio remote control.
In the case, the APP-control is connected "plug & play" to the original receiver of the radio control, using the included y-cable.
The APP-control works like the original radio control, so you can switch both heaters (if installed).
However, you will have to select which heater can be switched via APP-control like you would do for the original radio remote.
Without remote control
(The heater can be controled via the control panel at the roof (Camperunit) only.)
The APP-control is connected to the Camperunit, usingthe including y-cable.
- Switching by APP, SMS or Call
- 5 authorized numbers
- 24h timerfunction
- Input for external switch
- Input for external temp. sensor
- GPS-positioning (optional)
- external temperature sensor (optional)
Future-proof due to 4G (LTE) technology.
Our new APP-control v11x supports not only the 4G (LTE) standard but still 3G (UMTS) and 2G (GSM) mobile networks.
This way we can achieve the best possible reachability and functionality in all current european mobile phone networks.
Switzerland is about the shutdown the 2G (GSM) mobile network until the end of 2020. Devices which support the 2G standard only are not functional anymore.
The date for shutting down the 2G network in germany is not yet known.
The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.
You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.
The alarmsystem must output a +12v signal when triggered. For further information please have a look at our "installation guide" on this webpage.
The parking heater can only controlled via "authorized numbers". You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.
APP, SMS, Call
You can control the parking heater by APP, SMS, or Call. Switching the heater by call is free of charge as there is no connection established. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.
The APP-control requires a SIM-card wich is not included into delivery. You can use every SIM-card which supports sms and call e.g. prepaid card.
- voltage supply: 10 - 15VDC
- current consumption: standby <10mA, login: briefly 2A
- antenna connection: internal antenna
- SIM-card: nano-SIM
- temperature range: -30°C bis 80°C
- GSM-module: 4G (LTE), 3G (UMTS), 2G (GSM)
- dimensions: 63x60x22mm (LxWxH)
Scope of delivery
- danhag APP-control
- vehicle specific connection cord
- users manual
- GPS-receiver *
* if you select "with GPS" the GPS-receiver will be included into delivery .
The installation depends on the operating device used for the parking heater.
With radio remote control
The APP- control is connected "plug&play" to the original receiver of the the radio remote control using a y-cable.
The receiver is located beneath the steering column. If you adjust the steering column to the uppermost position you can easily reach the connector at the receiver.
Without radio remote control
(The heater can only be controled via the timer at the roov.)
The APP-control is connected to the connector beneath the drivers seat (red, 17-pole connector) using a y-cable.
Vehicles without radio remote control: the entry "radio remote control with display installed" has to be activated at the heater.
Once the app-control is installed, you will have to configure it first.
A detailed description can be found at the users manual of the app-control.
If you use our SMS-Configurator just select the following options:
Outputsignal: E-Bus 3