configuration multicontrol

At the first start of the multicontrol you have to choose the connected heater.
If you use the multicontrol with our auxiliary heater upgradekit for the VW T6.x please select the following one:

TT-Z / C / E

 Error "T12"

The multicontrol can be used to control different heaters.
Therefor you will have to select the right one at the first step of the configuration.
If a wrong heater is selected, Error "T12" appears at the display of the Multicontrol.
Below we briefly explain how you can select the heater in the menu of the Multicontrol.

1)
Press button "A" to switch on the multicontrol.
Select the menu "SETTINGS" by rotating the knop.
Confirm the setting by pressing the knop.

2)
Select the menu "RESET". 
Confirm the setting by pressing the knop.

3)
The display shows "OK".
Confirm by pressing the knop.

4)
The display turns "black".

5)
Press and hold the buttons "A" and "B" simoultaneously until the current heater is displayed.

6)
Choose the heater and confirm the setting by pressing the knop.