Mercedes Vito (w447) - APP-control for parking heater

€299.95 *
Content: 1 Stück

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

GPS:

remote control:

  • 6263-132
Control the parking heater with your mobile phone simply by APP, SMS or Call. Suitable for the... more
"Mercedes Vito (w447) - APP-control for parking heater"

Control the parking heater with your mobile phone simply by APP, SMS or Call.

Suitable for the following vehicles with factory installed parking heater:

  • Mercedes Vito (w447) with radio remote control
  • Mercedes Vito (w447) without radio remote control - only "heating switch" at the dashboard

 

Installation

The installation depends on the configuration of the vehicle.

Vehicle with radio remote control for parking heater

The APP-control is connected "plug & play" to the original receiver of the radio remote control using the included Y-cable.

fb-mb

 

Vehicle without radio remote control for parking heater ("heating switch" at the dasboard only)

The APP-control is connected "plug & play" directly to the climate control unit, using the included Y-cable.

 

 heizen-taste-vito-447

 

 

Features

  • Switching by APP, SMS or Call
  • 5 authorized numbers
  • 24h timerfunction
  • Input for external switch
  • Alarmfunction
  • Input for external temp. sensor
  • GPS-positioning (optional)
  • external temperature sensor (optional)

 

GPS-Positioning

The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.

 

Alarminput

You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.

The alarmsystem must output a +12v signal when triggered. For further information please have a look at our "installation guide" on this webpage.

 

Safety

The parking heater can only controlled via "authorized numbers". You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.

 

APP, SMS, Call

You can control the parking heater by APP, SMS, or Call. Switching the heater by call is free of charge as there is no connection established. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.

The APP-control requires a SIM-card wich is not included into delivery. You can use every GSM (2G) SIM-card e.g. prepaid card.

 

Technical data

  • voltage supply: 10 - 15VDC
  • current consumption: standby <10mA, login: briefly 2A
  • antenna connection: SMA
  • SIM-card: mini-SIM
  • temperature range: -30°C bis 80°C
  • GSM-module: Quadband (GSM 2G)
  • dimensions: 63x60x22mm (LxWxH)

 

Scope of delivery

  • danhag APP-control
  • GSM-antenna (straight)
  • vehicle specific connection cord
  • users manual
  • GPS-receiver (when selected "with GPS")
Installation Vehicle with radio remote control for the parking heater The APP-control is... mehr

Installation

Vehicle with radio remote control for the parking heater

The APP-control is connected directly to the receiver of the remote control.
The receiver is mounted behind the tachometer-unit.

 

vito-w447-Empfaenger
 

 

Installation of the APP-control

  • Unplug the original, 3-pole connector from the receiver.
  • Connect the Y-cable to the receiver.
  • Connect the original connector and the APP-control to the Y-cable.
  • Configure the APP-control.

 

Outputsignal

  • E-BUS 4

 


 

Vehicle without radio remote control for the parking heater ("heating switch" at the dashboard only)

The APP-control is connected directly to the climate control unit.

 

vito-447-demontage-klimabedienteil

 

vito-447-stecker-4-polig

 

y-Kabel_MB_vito447_SH_taste

 

 

Installation of the APP-control

  • Dismount the cover of the climate controlk panel.
  • Unplug the original, 4-pole connector from the climate control unit.
  • Connect the Y-cable to the climate control unit.
  • Connect the original 4-pole connector and the APP-control to the Y-cable.
  • Configure the APP-control.

 

Outputsignal

  • E-BUS 8

 


 

Note

We recommend to install the APP-control easy accessible. (E.g. in case you have to change the SIM-card later.)

 

 

APP-Steuerung Standheizung - Mercedes V-Klasse w447 Mercedes V-class (w447) - APP-control for...
Content 1 Stück
From €299.95 *
DANHAG - externer Temperatursensor External temperature sensor
Content 1 Stück
€12.95 *
DANHAG  APP-Fernsteuerung - Verlängerung 14-polig DANHAG extension cord 14-pin
Content 1 Stück
€12.95 *
APP-Steuerung Standheizung - GPS-Empfänger GPS receiver
Content 1 Stück
€89.00 *
APP-Steuerung BASIC APP-control W-BUS
Content 1 Stück
From €229.95 *
APP-Steuerung BASIC APP-control BASIC
Content 1 Stück
From €179.95 *
DANHAG Y-Kabel GPS / Temp Sensor DANHAG Y-cable GPS
Content 1 Stück
€12.95 *
APP-Steuerung Standheizung - externer Taster DANHAG push button with LED
Content 1 Stück
€12.95 *
Viewed