Ford Nugget from 2021 - APP-control parking heater

€299.00 *
Content: 1 Stück

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

GPS:

  • 6207-202

Installation - straightforward

 Control the parking heater with your smartphone by  APP  or  SMS.... more
"Ford Nugget from 2021 - APP-control parking heater"

 Control the parking heater with your smartphone by APP or SMS.

Supports the following vehicles with factory installed parking heater and dometic touch control-panel:

  • Ford Nugget from 2021

  

 

nugget-dometic-bedienteil

 

Connection 

The APP-control is connected "plug & play" to the original connector of the heater using the included vehicle specific y-cable.

  

Features 

  • switch by APP and SMS
  • 5 authorized numbers
  • 24h timerfunction
  • input for external switch or pushbutton
  • alarminput
  • input for external temperature sensor
  • GPS-positioning  (optional)
  • external temp. sensor (optional)

 

Please note

The heater has to be switched on and off using the same operating device. E.g. if you switch on the heater using the app / sms you must switch off the heater using app / sms too.  

 

Network coverage

Future-proof due to 4G (LTE) technology.

Our new APP-control v11x supports not only the 4G (LTE) standard but still 3G (UMTS) and 2G (GSM) mobile networks.
This way we can achieve the best possible reachability and functionality in all current european mobile phone networks.

 

GPS-Positioning

The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.

 

Alarminput

You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.

The alarmsystem must output a +12v signal when triggered. For further information please have a look at our "installation guide" on this webpage.

 

Safety

The parking heater can only controlled via "authorized numbers". You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.

 

APP, SMS

You can control the parking heater by APP or SMS. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.

The APP-control requires a SIM-card wich is not included into delivery. You can use every SIM-card which supports sms and call e.g. prepaid card.

 

Technical data

  • voltage supply: 10 - 15VDC
  • current consumption: standby <10mA, login: briefly 2A
  • antenna connection: internal antenna
  • SIM-card: nano-SIM
  • temperature range: -30°C bis 80°C
  • GSM-module: 4G (LTE), 3G (UMTS), 2G (GSM)
  • dimensions: 63x60x22mm (LxWxH)

 

Scope of delivery

  • danhag APP-control
  • vehicle specific connection cord
  • users manual
  • GPS-receiver *


*  if you select "with GPS"  the GPS-receiver will be included into delivery .

 

Installation There is already a connector for an additional radiocontrol behind the central... mehr

Installation

There is already a connector for an additional radiocontrol behind the central electrics inside the cupboard. 

The APP-control is connected to this connector, using the vehicle specific cable which is included into delivery.  The cable provides the power supply of the APP-control as well as the connection to the heater.

Ford-Nugget-2014 

  •  unscew the 4 marked screws
  • remove the cover
  • connect the adapter-cord of the APP-control to the white, 4-pole connector

 

Configuration:

After installing the APP-control, you will have to configure the module once.
Please refer to the users manual of the APP-control.
If you use our SMS-configurator, please choose the following setting:

Modell: Basic
Version: 10.x
Outputsignal: +12V

 

APP-Steuerung Standheizung - externer Taster DANHAG push button with LED
Content 1 Stück
€12.95 *
DANHAG - externer Temperatursensor External temperature sensor
Content 1 Stück
€12.95 *
DANHAG Y-Kabel GPS / Temp Sensor DANHAG Y-cable GPS
Content 1 Stück
€12.95 *
Viewed