Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 6207-110
Control the parking heater with your smartphone by APP, SMS and Call.
Supports the following vehicles with factory installed parking heater and control-panel at the roof:
- Ford Nugget from 2014
The APP-control is connected "plug & play" to the original electric unit using the included vehicle specific connection cable.
- switch by APP, SMS and Call
- 5 authorized numbers
- 24h timerfunction
- input for external switch or pushbutton
- input for external temperature sensor
- GPS-positioning (optional)
- external temp. sensor (optional)
The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.
My car already has this feature ...
A "backup solution" can always be usefull. Professional thieves are specialized in deactivating original car anti-theft-systems within seconds.
The ignition has to be wired separately.
You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.
The alarmsystem must deliver a +12v signal when triggered. Please find further information at "installation guides" at this website.
The parking heater can be controlled via "authorized numbers" only. You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.
APP, SMS and Call
You can control the parking heater by APP, SMS, or Call. Switching the heater by call is free of charge as there is no connection established. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.
The APP-control requires a SIM-card which is not included into delivery. You can use every GSM (2G) SIM-card e.g. prepaid card.)
- Supply voltage: 10 - 15VDC
- Current consumption: standby <10mA, login: briefly 2A
- Antenne connection: SMA
- SIM-card: mini-SIM
- Temperatre range: -30°C bis 80°C
- GSM-modul: Quadband (GSM 2G)
- GPS-receiver: SiRFstar III
- Dimensions: 63x60x22 (LxWxH)
scope of delivery
- danhag APP-control
- GSM-Antenna (straight)
- vehicle specific connection cable
- users manual
- GPS-receiver (optional)
There is already a connector for an additional radiocontrol behind the central electrics inside the cupboard.
The APP-control is connected to this connector, using the vehicle specific cable which is included into delivery. The cable provides the power supply of the APP-control as well as the connection to the heater.
- unscew the 4 marked screws
- remove the cover
- connect the adapter-cord of the APP-control to the white, 4-pole connector
After installing the APP-control, you will have to configure the module once.
Please refer to the users manual of the APP-control.
If you use our SMS-configurator, please choose the following setting: