Porsche Macan from 2014 - APP-control parking heater
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 6211-136
Installation - straightforward
Control the parking heater with your mobile phone simply by APP, SMS or Call.
Suitable for the following vehicles with factory installed parking heater and radio remote control:
- Porsche Macan from 2014
Connection
The APP-control is connected "plug & play" to the original receiver of the radio remote control using the included Y-cable.
Features
- Switching by APP, SMS or Call
- 5 authorized numbers
- 24h timerfunction
- Input for external switch
- Alarmfunction
- Input for external temp. sensor
- GPS-positioning (optional)
- external temperature sensor (optional)
Network coverage
Future-proof due to 4G (LTE) technology.
Our new APP-control v11x supports not only the 4G (LTE) standard but still 3G (UMTS) and 2G (GSM) mobile networks.
This way we can achieve the best possible reachability and functionality in all current european mobile phone networks.
Switzerland is about the shutdown the 2G (GSM) mobile network until the end of 2020. Devices which support the 2G standard only are not functional anymore.
The date for shutting down the 2G network in germany is not yet known.
GPS-Positioning
The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.
Alarminput
You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.
The alarmsystem must output a +12v signal when triggered. For further information please have a look at our "installation guide" on this webpage.
Safety
The parking heater can only controlled via "authorized numbers". You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.
APP, SMS, Call
You can control the parking heater by APP, SMS, or Call. Switching the heater by call is free of charge as there is no connection established. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.
The APP-control requires a SIM-card wich is not included into delivery. You can use every SIM-card which supports sms and call e.g. prepaid card.
Technical data
- voltage supply: 10 - 15VDC
- current consumption: standby <10mA, login: briefly 2A
- antenna connection: internal antenna
- SIM-card: nano-SIM
- temperature range: -30°C bis 80°C
- GSM-module: 4G (LTE), 3G (UMTS), 2G (GSM)
- dimensions: 63x60x22mm (LxWxH)
Scope of delivery
- danhag APP-control
- vehicle specific connection cord
- users manual
- GPS-receiver *
* if you select "with GPS" the GPS-receiver will be included into delivery .
Vehicle manufacturers are constantly developing their vehicles and making changes as part of the model update.
Many vehicles are also available in countless equipment variants.
We do not have the opportunity to test our devices in all vehicles or equipment variants.
It is therefore possible that the devices we offer may not function as intended in some vehicle models or versions and/or may function as intended and / or cause error entries.
In this case, we will of course take the device back.
We will not reimburse any costs incurred for troubleshooting, installation, etc.
Data according to 'EU-Produktsicherheitsverordnung (GPSR)'
Manufacturer
DANHAG - Ing. Büro Gornicki
Danielle Gornicki
Zur alten Börse 77
12681 Berlin
Deutschland
E-Mail: info@danhag.de
Authorised person (contact point) for product safety issues
DANHAG - Ing. Büro Gornicki
Danielle Gornicki
Zur alten Börse 77
12681 Berlin
Deutschland
E-Mail: info@danhag.de
Safety instructions
DANGER TO LIFE !
This product is used to switch an existing parking heater with a mobile device (cell phone, tablet, etc.).
ATTENTION: Parking heaters cause toxic exhaust fumes during operation! NEVER operate the parking heater in closed rooms, there is an acute DANGER TO LIFE!
The app-control uses the Short Message Service (SMS) of the mobile phone operator to control the heater. The SMS messages are sent by the mobile network operator. Depending on the utilization of the mobile phone network and the reception quality at the location of the vehicle, it may happen that the SMS is delivered with a delay, that the SMS is delivered with a delay. In this case, the switching command is also implemented with a time delay.
GENERAL SAFETY INSTRUCTIONS
This product may only be used by persons who have reached the age of majority in accordance with the applicable law in the respective country within the scope of the EU Product Safety Regulation (GPSR) and are in full possession of their mental faculties and have fully read and understood the installation and operating instructions without outside help.
The product may only be installed and commissioned in the presence of a second, fully qualified and technically experienced person who has also read and fully understood the installation and operating instructions. and operating instructions and is able to provide immediate first aid in the event of danger.
Observe the generally applicable safety regulations. Wear suitable protective clothing during installation and commissioning, but at least the protective equipment prescribed by the employers' liability insurance association.
This product is connected in the vehicle with a connecting cable. There is a DANGER of getting caught on the cable, falling or strangulation.
This product is supplied with power via the vehicle battery. The power consumption depends on the mobile phone reception. In places with poor reception (e.g. underground car park), the power consumption is increased. Disconnect the product from the power supply if you do not use the vehicle for a longer period of time (2 weeks) to reduce the risk of a harmful deep discharge of the vehicle battery.
INTENDED USE
Only use the product for the intended use specified in the operating instructions. Do NOT use the product to switch devices that could be dangerous if the control unit malfunctions. In particular, DO NOT use the product for switching life support systems or in aerospace applications.
This product is NOT a toy.
This product contains small parts (SIM card holder, unlocking tool) that can be swallowed or inhaled. Ensure that the product is stored or installed out of the reach of children.
This product is NOT suitable for consumption. Traces of nuts and pulses may be present.
The DANHAG team is pleased that you have read this information in accordance with the EU Product Safety Regulation (GPSR). If you have any questions about product safety please contact our authorised person for product safety issues.
Installation
The APP-control is connected "plug & play" directly to the receiver of the remote control.
The receiver is mountet behind the roof lining below the antenna. To get to the receiver you have to remove the rubber seal from the tailgate on the upper half and lower the roof lining.
Outputsignal
- E-BUS 5