DANHAG E-BUS converter MQB (E3)

With our e-bus converter, you can switch almost every data-bus controlled heater (E-Bus, LIN-BUS) with a simple +12v signal. 

Already successfully  tested with the following parking heaters:

•     VW Crafter II (Air and Waterheater)
•     VW T6 (Waterheater only)
•     VW T6.1 (Air and Waterheater)

Please note: The cars must have a parking heater installed. If your car has an auxiliary heater only, you will have to upgrade this heater to a parking heater first. 

Function

The converter is connected to the power supply and the parking heater. You can than switch the heater using a simple +12v signal instead of a data-signal.

If your car already has a remote control for the parking heater, you can connect the converter plug&play to the receiver of the remote control using our y-cable. The y-cable is not included into delivery and can be ordered separately.

Technical data

•     supply voltage: 10 - 15VDC
•     current consumption: Standby <1mA
•     temperature range: -25°C bis 85°C
•     dimensions: 63x60x22mm (LxWxH)

Scope of delivery

•     danhag E-BUS converter
•     universal connection cord
•     users manual