Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 6305-001
Installation - straightforward
Upgrade the auxiliary heater of your VW T6 to an parking heater.
Suitable for the following vehicles
- VW T6 - Climatronic
Many vehicles already have an auxiliary heater installed. This heater is used to heat up the engines coolant more quickly in cold conditions. Unlike a real parking heater, an auxiliary heater can only be used in certain conditions with the engine running.
Our "Zuheizeraufrüstung - Auxiliary heater upgrade" enables the auxiliary heater to work as an parking heater even when the engine is not running and the ignition is turned off. Due to the "plug&play" connection, the installation is very easy and can be done within a couple of minutes. There are no tools necessary or have the software of the heater to be changend.
As soon as you have installed the auxiliary heater upgradekit, you can control the heater and ventilation via a simple +12V signal on the input pin of the can-gateway.
So you can just use every operating device which delivers a +12V output signal.
- Remote control
- APP-Control (Basic)
Please choose the needed connection cord during your order.
You can order an operation device separately: Bedienelemente
Why to choose our auxiliary heater upgrade kit?
- Easy plug & play installation within a couple of minutes without tools.
- There are no permanent changes at the cars wiring or software necessary.
- No software update of the heater needed.
- Perfect for leased cars as you can remove the upgradekit without leaving any traces.
- Paking ventilation for the summermonths
- Supply voltage: 10 - 15VDC
- Current consumption: Standby <10mA
- Dimensions: 63x60x22 (LxBxH)
Scope of delivery
- CAN Gateway T6
- vehicle specific Y-cabel
- users manual
- connection cord for an operating device
Does my vw T6 have an auxiliary heater?
If you car has an auxiliary heater installed, you will find a copy of the type plate on the drivers door.
Installation auxiliary heater upgrade kit VW T6 - Climatronic
The upgrade kit consists of an CAN-Gateway and a vehicle specific y-cable.
The CAN-Gateway is connected plug&play to the existig connector of the auxiliary heater.
The connector is located beneath the drivers seat. I order to reach this connector easily, we recommend to slide the drivers seat all the way back.
1) Slide the drivers seat all the way back.
2) Figure 2 shows the conenctor of the auxiliary heater. To unlock the conenctor, just push the "nose" on the right side (arrow).
3) Unplug the connector.
4) Plugin the connector of the Y-cable.
5) Connect the connector of the auxiliary heater to the Y-cable.
6) Connect the operation device to the Y-cable.
Connection of the operating device
To control the heater / ventilation you will need an operation device.
You can use an existing one or order it at our shop.
Connect the operating device to the CAN-Gateway, using the connection cord.
Depending on your operating device, it might be necessay to configure the device.
For further information please refer to the manual of your device.