VW Crafter II (from 2017) - APP-control for parking heater

€249.95 *
Content: 1 Stück

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays


  • 6224-147
Control the parking heater with your smartphone by APP , SMS and Call . Supports the... more
"VW Crafter II (from 2017) - APP-control for parking heater"

Control the parking heater with your smartphone by APP, SMS and Call.

Supports the following vehicles with factory installed parking heater and radio remote control.

  • VW Crafter II (from 2017)



The APP-control is connected to the original receiver of the radio remote control using the included Y-cable.




  • switch by APP, SMS and Call
  • 5 authorized numbers
  • 24h timerfunction
  • input for external switch or pushbutton
  • alarminput
  • input for external temperature sensor
  • GPS-positioning  (optional)
  • external temp. sensor (optional)



The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.

My car already has this feature ... 
A "backup solution" can always be usefull. Professional thieves are specialized in deactivating original car anti-theft-systems within seconds.

The ignition has to be wired separately.


You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.

The alarmsystem must deliver a +12v signal when triggered. Please find further information at "installation guides" at this website.



The parking heater can be controlled via "authorized numbers" only. You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.


APP, SMS and Call

You can control the parking heater by APP, SMS, or Call. Switching the heater by call is free of charge as there is no connection established. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.

The APP-control requires a SIM-card which is not included into delivery. You can use every GSM (2G) SIM-card e.g. prepaid card.)


Technical data

  • Supply voltage: 10 - 15VDC
  • Current consumption: standby <10mA, login: briefly 2A
  • Antenne connection: SMA
  • SIM-card: mini-SIM
  • Temperature range: -30°C bis 80°C
  • GSM-modul: Quadband (GSM 2G)
  • GPS-receiver: SiRFstar III
  • Dimensions: 63x60x22 (LxWxH)


scope of delivery

  • APP-control
  • GSM-Antenna (straight)
  • universal connection cable
  • users manual
  • GPS-receiver (optional)
Installation The APP-control comes with an universal connection cable. Connect the red wire to... mehr


The APP-control comes with an universal connection cable. Connect the red wire to +12V and the brown wire to ground. The purple wire (output 3) has to be connected to PIN 7 (purple / black) at the rear site of the "heating switch".


The APP-control simulates a short pressing of the "heating switch. Please configure the output to "impuls" by sending a SMS with the following content to the APP-control:


"12345" - your current password.  On delivery state or after a reset the password will be : "12345".


The status shown in the "INFO - SMS" does not represent the actual status of the heater. You can switch on the heater by the APP-control only. The heater will than run for the time programmed in the board computer. You can switch-off the heater at any time using the "heating switch".