Mercedes V-class (w447) - APP-control for parking heater

€299.95 *
Content: 1 Stück

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

GPS:

  • 6203-129
Control the parking heater with your mobile phone simply by APP, SMS or Call. Suitable for the... more
"Mercedes V-class (w447) - APP-control for parking heater"

Control the parking heater with your mobile phone simply by APP, SMS or Call.

Suitable for the following vehicles with factory installed parking heater (water) :

  • Mercedes V-class (w447) with remote control
  • Mercedes V-class (w447) without remote control

 

Installation

The APP-control is connected directly to the A/C control unit.

fb-mb

 

Features

  • Switching by APP, SMS or Call
  • 5 authorized numbers
  • 24h timerfunction
  • Input for external switch
  • Alarmfunction
  • Input for external temp. sensor
  • GPS-positioning (optional)
  • external temperature sensor (optional)

 

GPS-Positioning

The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.

 

Alarminput

You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.

The alarmsystem must output a +12v signal when triggered. For further information please have a look at our "installation guide" on this webpage.

 

Safety

The parking heater can only controlled via "authorized numbers". You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.

 

APP, SMS, Call

You can control the parking heater by APP, SMS, or Call. Switching the heater by call is free of charge as there is no connection established. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.

The APP-control requires a SIM-card wich is not included into delivery. You can use every GSM (2G) SIM-card e.g. prepaid card.

 

Technical data

  • voltage supply: 10 - 15VDC
  • current consumption: standby <10mA, login: briefly 2A
  • antenna connection: SMA
  • SIM-card: mini-SIM
  • temperature range: -30°C bis 80°C
  • GSM-module: Quadband (GSM 2G)
  • dimensions: 63x60x22mm (LxWxH)

 

Scope of delivery

  • danhag APP-control
  • GSM-antenna (straight)
  • vehicle specific connection cord
  • users manual
  • GPS-receiver *

 

If you choose "with GPS" the GPS-receiver will be included into delivery.

Installation The APP-control is connected directly to the A/C control unit. The A/C control... mehr

Installation

The APP-control is connected directly to the A/C control unit.
The A/C control unit is mounted at the passenger footwell above the fuse- and relais carrier.

 

v-klasse-w447-klimasteuerger-t

 

Installation of the APP-control

  • Dismantle the cover of the fuse-carrier.
  • Remove the 22-pin connector from the A/C control unit. 
  • Remove the original blue / white from PIN 14 of the connector. 
  • Plug in the yellow wire of the APP-control into PIN 14 of the connector.
  • Connect the original white / blue wire with the yellow / black wire of the APP-control.
  • Connect the 14-pin connector to the A/C control unit.
  • Connect the power supply to the APP-control (+12V, ground).
  • Configure the APP-control according to the users manual.

 

v-klasse-w447-stecker-detail-1

  

v-klasse-w447-stecker-detail-2

 

v-klasse-w447-stecker-detail-3

 

v-klasse-w447-Schaltplan

Outputsignal

The outputsigal depends on the configuration of the vehicle:

  • E-BUS 4: with remote control
  • E-BUS 7: without remote control ("Heating" switch at the dashboard only)

 

 You can configure the output signal by sending a SMS with the following content to the APP-control:

12345;30=4;#

Where 12345 is your password (the default password is 12345 ).
4 represents the outputsignal to be programmed.

 

 

 

 

APP-Steuerung BASIC APP-control W-BUS
Content 1 Stück
From €229.95 *
DANHAG - externer Temperatursensor External temperature sensor
Content 1 Stück
€12.95 *
DANHAG Diagnose interfac W-BUS diagnostic interface
Content 1 Stück
€69.95 *
DANHAG W-BUS Konverter DANHAG W-BUS converter
Content 1 Stück
€119.95 *
APP-Steuerung BASIC APP-control BASIC
Content 1 Stück
From €179.95 *
APP-Steuerung Standheizung - VW T6 (Luftzusatzheizung) VW T6 - APP-control for parking airheater
Content 1 Stück
From €299.95 *
DANHAG  APP-Fernsteuerung - Verlängerung 14-polig DANHAG extension cord 14-pin
Content 1 Stück
€12.95 *
Viewed