Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 6281-186
Control the parking heater with your smartphone by APP, SMS and Call.
Supports the following vehicles with factory installed parking heater (air-heater Eberspächer Airtronic Airtronic) and timer Easystart T.
- Mercedes Marco-Polo Horizon (V-Klasse w447)
- Mercedes Marco-Polo Horizon (Vito w447)
The APP-control is connected directly to the timer using the included Y-cable.
- switch by APP, SMS and Call
- 5 authorized numbers
- 24h timerfunction
- input for external switch or pushbutton
- input for external temperature sensor
- GPS-positioning (optional)
- external temp. sensor (optional)
The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.
My car already has this feature ...
A "backup solution" can always be usefull. Professional thieves are specialized in deactivating original car anti-theft-systems within seconds.
The ignition has to be wired separately.
You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.
The alarmsystem must deliver a +12v signal when triggered. Please find further information at "installation guides" at this website.
The parking heater can be controlled via "authorized numbers" only. You can configure these numbers simply by SMS. The integrated GSM-module has a temperature range from -30°C up to 80°C to ensure proper function at all conditions.
APP, SMS and Call
You can control the parking heater by APP, SMS, or Call. Switching the heater by call is free of charge as there is no connection established. Switching the heater by SMS can cause additional costs, depending on your mobile provider. APP’s are sending SMS in the background, so there could arise additional costs too.
The APP-control requires a SIM-card which is not included into delivery. You can use every GSM (2G) SIM-card e.g. prepaid card.)
- Supply voltage: 10 - 15VDC
- Current consumption: standby <10mA, login: briefly 2A
- Antenne connection: SMA
- SIM-card: mini-SIM
- Temperature range: -30°C bis 80°C
- GSM-modul: Quadband (GSM 2G)
- GPS-receiver: SiRFstar III
- Dimensions: 63x60x22 (LxWxH)
scope of delivery
- GSM-Antenna (straight)
- universal connection cable
- users manual
- GPS-receiver (when "with GPS" selected)
The APP-control is connected to the original timer using the included Y-cable.
Dismount the timer
- Disconnect the original, 12-pole connector from the timer.
- Connect the Y-cable to the timer.
- Connect the original, 12-pole connector to the Y-cable.
- Connect the Y-cable to the APP-control
Note: The maximum heating-time is limited by the heater itself. The heater will shut down after this time, regardless of the configured run-time.