Citrön Jumper from 2014 - APP-control parking heater

 Control the parking heater with your smartphone by APP / SMS.

Supports the following vehicles with factory installed parking heater and timer:

• Citrön Jumper from 2014 till 2022 (Timer 1533)
• Citrön Jumper from 2022 (Multicontrol)

Connection 

The APP-control is connected "plug & play" to the original receiver using the included vehicle specific y-cable.

Features 

• switch by APP, SMS
• 5 authorized numbers
• 24h timerfunction
• input for external switch or pushbutton
• alarminput
• input for external temperature sensor
• GPS-positioning  (optional)
• external temp. sensor (optional)

Network coverage

Future-proof due to 4G (LTE) technology.

Our new APP-control v11x supports not only the 4G (LTE) standard but still 3G (UMTS) and 2G (GSM) mobile networks.
This way we can achieve the best possible reachability and functionality in all current european mobile phone networks.

GPS-Positioning

The APP-control supports an external GPS-receiver which can be connected to the aux-socket at the back of the module. If the ignition is switched on the position is determined about every 1 second and can be queried via SMS. If the ignition is switched off, the GSP-receiver is activated to determine the position only. You will get a SMS containing the coordinates of the car as well as a link to "google maps" which shows the current position on the map.

 

Alarminput

You can connect an already existing alarmsystem to the APP-control. You will be informed via SMS and call as soon as the alarm is triggered.

The alarmsystem must output a +12v signal when triggered. For further information please have a look at our "installation guide" on this webpage.
 

APP, SMS

You can control the parking heater by APP or SMS. Switching the heater by SMS / APP can cause additional costs, depending on your mobile provider.  APP’s are sending SMS in the background, so there could arise additional costs too.

The APP-control requires a SIM-card wich is not included into delivery. You can use every SIM-card which supports sms e.g. prepaid card.

 

Technical data

• voltage supply: 10 - 15VDC
• current consumption: standby <20mA, login: briefly 2A
• antenna connection: internal antenna
• SIM-card: nano-SIM
• temperature range: -30°C bis 80°C
• GSM-module: 4G (LTE), 3G (UMTS), 2G (GSM)
• dimensions: 63x60x22mm (LxWxH)

Scope of delivery

• danhag APP-control
• vehicle specific connection cord
• users manual
• GPS-receiver *

*  if you select "with GPS"  the GPS-receiver will be included into delivery .

NOTE
Vehicle manufacturers are constantly developing their vehicles further and making changes as part of model upgrades. Many vehicles are also available in countless equipment variants. We do not have the possibility to test our devices, connectors and wiring harnesses in all vehicles or equipment variants. It may happen that the devices we offer do not function as intended in some vehicle models or versions and / or cause error entries. In this case, we will take the device back. We will not reimburse any costs incurred for troubleshooting and installation.

By purchasing this item, you expressly declare that you have read, fully understood and accepted the above information.

The following section is only relevant for the APP control and radio remote control ‘T99’ offered by us.

POWER SUPPLY NOT INCLUDED
Directive (EU) 2022/2380 of the European Parliament and of the Council of 23 November 2022 amending Directive Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of of radio equipment on the market, the legislator has introduced an extended programme of obligations for distributors of electrical equipment such as mobile phones, tablets and the like. From 28.12.2024, or 28.04.2026 for laptops, laptops, two new labelling elements must be used to indicate whether a power supply unit is included in the included in the scope of delivery and which one is compatible.

On the basis of the above-mentioned directive, we hereby dutifully inform you that no power supply unit is included in the scope of delivery of the radio systems offered by us.

Furthermore, we hereby inform you that no power supply unit is required to operate the radio systems we offer. The power is supplied via the vehicle's electrical system. The list of compatible power supply units required by law is therefore not necessary.

Information in accordance with the EU Product Safety Regulation (GPSR)

Manufacturer information

The manufacturing information includes the address and related information of the manufacturer of the product.

DANHAG - Ing. Büro Gornicki
Danielle Gornicki
Zur alten Börse 77
12681 Berlin
Deutschland
E-Mail: info@danhag.de 

Person responsible for the EU

Economic operator established in the EU who ensures that the product complies with the required regulations.

DANHAG - Ing. Büro Gornicki
Danielle Gornicki
Zur alten Börse 77
12681 Berlin
Deutschland
E-Mail: info@danhag.de

Responsible person for non-EU

This information is not applicable, this product is not sold in countries outside the EU..

Authorised person (contact point) for product safety issues

DANHAG - Ing. Büro Gornicki
Danielle Gornicki
Zur alten Börse 77
12681 Berlin
Deutschland
E-Mail: info@danhag.de